Details

---

Teclock Durometer Hardness Tester GS-744G series – corresponding to ISO and JIS standards of rubber hardness measurement by MSP Metrology (M) Sdn Bhd from Teclock Japan.
 

---

Features

   

---

TECLOCK Original Standard Durometer (For Soft Material)

This is available as TECLOCK original standard based on customers’ requirement, even though they are not prescribed in JIS or ISO. Type E 2 durometer for soft rubber with around half of spring load value of Type E, and Type FO to measure hardness of polystyrene sponge for the level of sponge for washing dishes are available.





Peak Pointer Type   

Some of Rubbers, Elastomer’ elastic body is not easily read the maximum value after firm contacting with a presser foot of durometer , due to the stress relaxation. The pointer indicates the descendent value but the peak pointer is holding the maximum measured value. The peak pointer type can easily read the maximum value efficiently.

In case the pointer cannot be read directly due to some obstacles altough the measuring can be done, the mesured value can be confirmed from peak pointer after measuring. The upper / lower limiters equipped will be effectively used in tolerance judgment.

 

---

Specifications

 

Model	Type	Application/Materials	Conform Standard	Spring Load Value (0-100)	Indentor Shape	Indentor Height	Weight(g)
GS-744G	Type FO (Peak Pointer Type)	Soft Styrene Foam	Teclock FO	550-4300mN (56.1-438.6gf)	Cylindrical Cone of ∅25.2	2.50	500

 

---

Dimension