Details

---

Teclock Durometer Hardness Tester GS-720H series – corresponding to ISO and JIS standards of rubber hardness measurement by MSP Metrology (M) Sdn Bhd from Teclock Japan.
 

---

Features

   

---

Deep Hole / Long Leg Type

In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot. The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.

 

---

Specifications

 

Model	Type	Application/Materials	Conform Standard	Spring Load Value (0-100)	Indentor Shape	Presser Foot Diameter (mm)	Indentor Height	Weight(g)
GS-720H	Type D (Peak Pointer Type)	Hard Rubber/Deep Hole Type (Narrow Hole)	JIS K 6253 ISO 7619 ASTM D 2240	0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	∅12	2.50	140

 

---

Dimension