Teclock Durometer Hardness Tester GS-720H Series (Deep Hole/Long Leg Type)

Teclock Durometer Hardness Tester GS-720H Series (Deep Hole/Long Leg Type)


Specifications
Details

Teclock Durometer Hardness Tester GS-720H series – corresponding to ISO and JIS standards of rubber hardness measurement by MSP Metrology (M) Sdn Bhd from Teclock Japan.
 

Features

 
 


Deep Hole / Long Leg Type


In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot. The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.

 


Specifications

 
Model Type Application/Materials Conform Standard

Spring Load Value (0-100)

Indentor Shape Presser Foot Diameter (mm) Indentor Height Weight(g)
GS-720H Type D (Peak Pointer Type) Hard Rubber/Deep Hole Type (Narrow Hole) JIS K 6253
ISO 7619
ASTM D 2240
0-44450mN (0-4533gf) Conical Cone of R0.1 with 30° angle ∅12 2.50 140
 

Dimension

 

View more about Teclock Durometer Hardness Tester GS-720H Series (Deep Hole/Long Leg Type) on main site