Imada High Functional Type Vertical Motorized Test Stand (EMX Series)
Category: Force StandForce Stand
Specifications
Details
Vertical Motorized Test Stand EMX is advanced type with 1000N capacity to Measure Force during Push Pull Testing by MSP Metrology Sdn Bhd from Imada Japan
Featured
EMX Series
High Functional Type Vertical Motorized Test Stand
Advanced motorized test stand has capacity of 1000N and is equipped with the highest functions. Wide range of measuring speed (0.5 to 600m/min) and travel setting are available for more diverse and various measurement. High rigidity enables precise measurement. Equipped with a contact point detection function and a function to memorize up to 5 measurement conditions, which greatly improves measurement efficiency.
Improved Repeatability
- Constant testing speed and position for applying compression and tensile force
- Rugged design minimized influence of deformation (max. 0.25mm)
- Ball screw realizes smooth motion
- Digital setting of travel distance by 0.1mm
Versatility for a Wide Variety of Testing
- Wide speed range from 0.5 to 600 mm/min
- Ideal for durability test by setting the number of test cycles to repeat
- Useful timer function for compression testing allows pausing at a set force value
- Attached table can mount a wide range of grips and fixtures
- External signal input is equipped
Easy Operation
- Easy set-up mode
- Ergonomically inclined control panel
- Dial operation for digital setting
- 4 testing modes to meet testing requirements
Functions for Efficient Testing
- Automatically detects contact point (*1)
- Up to 5 testing patterns can be stored or copied
- Automatically changes traveling and measuring speed at a set force value (*1)
- Starts software together with test stand motion (*1)
- Stops or Returns force gauge when it senses that test sample is broken (*1*2)
*1 Requires certain models of force gauge and optional cable.
*2 This function is not able to be used together with CONTACT DETECTION.
Specifications
| Japan Model | EMX-500N | EMX-1000N |
| US Model | EMX-110 | EMX-275 |
| Capacity | 500N | 1000N |
| Max. height of a sample (*1) | 295mm | 320mm |
| Rigidity | [Standard models] less than 0.25mm [Long stroke (optional)] less than 0.6mm |
|
| Stroke Limit | Controllable with upper and lower knob Digital length limit (travel distance) |
|
| Test speed | Digital 0.5 to 600mm/min [0.5 – 20mm/min: by 0.5mm/min] [20 – 100mm/min: by 5mm/min] [100 – 600mm/min: by 10mm/min] |
|
| Measuring Modes | Manual / Jog / Cycle mode | |
| Functions | Counter (number of tests to repeat): Max. 65535 times Timer (pausing time): Up to 99 min 59 sec 9 (by 0.1 sec) Length limit (travel distance): by 0.1mm Storing operating patterns: up to 5 patterns CONTACT DETECTION (*2*3), BREAK DETECTION (*2*3) Easy Setup (simple operating mode selection) Copy (operating condition duplication) Menu lock (menu protection lock) |
|
| Control | Emergency stop, force control (*4), overload prevention (*4, *5), external signal input | |
| Operating temperature humidity | 0 to +40 degree Celsius 35 to 70% (avoid condensation) |
|
| Voltage | AC100 to 240V, 50/60Hz (Selectable from 100, 120 and 230V. Accessories are provided accordingly.) | |
| Power Consumption | 50W | |
| Weight | Approx. 19kg | Approx. 24kg |
| Accessories | Operating manual, power cable, spare fuse, tools, GF-1 (Grip mounting adaptor) Anti-tip fixture (only for -L option) |
Operating manual, power cable, spare fuse, tools, GF-2 (Grip mounting adaptor) Anti-tip fixture (only for -L option) |
| Available Options (*6) | -L: Extended stroke by 300mm-FA: Inbuilt liner scale | |
| Mountable Force Gauge (*7) | Mechanical Force Gauge: FB, PS, PSM series Digital Force Gauge: DST, DSV, ZTS, ZTA series (up to 1000N) Load cell: DPU series (up to 500N *7) |
|
| Mechanical Force Gauge: PSH series Digital Force Gauge: ZTS, ZTA series (over 2500N) Load cell: DPU series (1000 to 5000N *8) |
||
*1 Max. sample height refers to the distance between the table and the tip of force gauge measuring shaft when the head is at the top. (With up to 1000N model of ZTS/ZTA series)
*2 Force gauge ZTA series and optional cable CB-528 are required.
*3 CONTACT DETECTION and BREAK DETECTION are not able to be used together.
*4 Force gauge ZTS/ZTA series and optional cable CB-528 are required.
*5 It does not guarantee complete protection against overloading.
*6 Add the option code after the model name to complete the model with options. e.g., When adding long stroke option to EMX-1000N … Model: EMX-1000N-L
*7 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.
*8 Mounting block (sold separately) is required to mount 1000N to 5000N range of DPU series.
*2 Force gauge ZTA series and optional cable CB-528 are required.
*3 CONTACT DETECTION and BREAK DETECTION are not able to be used together.
*4 Force gauge ZTS/ZTA series and optional cable CB-528 are required.
*5 It does not guarantee complete protection against overloading.
*6 Add the option code after the model name to complete the model with options. e.g., When adding long stroke option to EMX-1000N … Model: EMX-1000N-L
*7 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.
*8 Mounting block (sold separately) is required to mount 1000N to 5000N range of DPU series.
View more about Imada High Functional Type Vertical Motorized Test Stand (EMX Series) on main site